Round Swimming Pool DIY Installation Guide > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Constructing a circular pool is an exciting way to add a splash of luxury to your yard.
Despite professional installation being safest, many homeowners discover that a round pool can be constructed successfully with a DIY approach.
Below is a user‑friendly guide that covers every stage—from preparation and excavation to finishing touches—allowing you to enjoy a beautiful, functional pool without overspending.

Know Your Location and Legal Requirements

1. Check Local Building Codes. Before you touch a shovel, verify that your local municipality allows residential pools. You’ll likely need a permit, and there may be setbacks, fencing, and safety requirements that you must meet.
   
   
2. Assess the Terrain. Flat ground is ideal. If your yard slopes, you’ll need to level it or find a spot that naturally allows a round shape. Check for underground utilities—contact local utility services to locate lines.
   
   
3. Set Size and Depth. Decide on the diameter that fits your space and needs. Typical sizes range from 12 to 20 feet in diameter. For depth, a shallow zone (3–4 ft) for lounging and a deeper area (5–7 ft) for swimming or diving will give you versatility.
   
   

Assemble Materials and Tools

Excavator or backhoe (or a sturdy rented mini‑excavator for smaller pools)

Shovels, wheelbarrows, and a sturdy tarp for debris

A steel frame or wooden rim to shape the pool perimeter

Reinforcing steel bars (rebar) or a pre‑formed concrete ring

Waterproofing membrane (polyethylene liner or epoxy coating)

Pool plumbing kit (pump, filter, skimmer, return jets)

Pool tiles or coping stones for the lip

Concrete or plaster for the interior finish

Safety fence and gate (if required)

Keeping a detailed inventory list will help you avoid pricey last‑minute buys.

Step‑by‑Step Guide

1. Outline the Pool. Use a garden hose or string to outline the circle on the ground. Stake the ends securely. Check the diameter with a tape measure. This ensures the pool will be perfectly round.
   
   
2. Remove Soil from the Site. Dig to the needed depth, maintaining a smooth, even slope from shallow to deep. The bottom should be flat, especially in the shallow area. If you’re using a concrete or plaster finish, a level base is essential.
   
   
3. Install the Perimeter Frame. Construct a sturdy ring along the excavation’s edge. For concrete pools, a steel rebar circle or a prefabricated ring is ideal. If you choose a vinyl liner, simply lay the liner over the excavated area and secure the edges with a rim or a ring of sand.
   
   
4. Apply the Waterproofing Layer.
   

Concrete Pools: Pour a concrete footing around the perimeter and embed rebar for reinforcement. Cure the concrete for at least 28 days.

Vinyl Liner: Lay the liner over the bottom and sides, smoothing wrinkles carefully. Tie the edges with a rim or a sand ring, keeping the liner taut.

1. Lay Plumbing. Install the skimmer, return jets, and filter system. Run the plumbing lines through the rim of the pool. Insert the plumbing before the concrete sets for concrete pools. Employ a pre‑cut inlet to prevent cutting the liner for vinyl liners.
   
   
2. Apply Interior Treatment.
   

Concrete: After curing, apply a cementitious plaster or a special pool plaster. This yields a smooth surface for swimming.

* Vinyl: The liner is the interior surface; no further finish is required.

1. Lay Coping or Tiles. Lay coping stones, concrete coping, or decorative tiles around the lip. It appears polished and shields the rim from erosion.
   
   
2. Fill with Water. Once everything is set and plumbing is verified, fill the pool stahlrahmen. Check for any leaks. Should any leaks appear, patch them promptly.
   
   
3. Begin the Filtration System. Run the filter and pump for 24 hours to circulate the water. Add chlorine or another sanitizer to maintain water purity.
   
   
4. Final Inspection. Ensure all safety requirements are met—fencing, gate, and any required signage. If a professional inspection is required by local code, schedule it before using the pool.
   
   

Success Tips for DIY Pools

• Drainage Planning. Ensure proper grading around the pool so water doesn’t pool around the foundation. A gentle slope away from the pool helps keep the area dry.
  
  
• Use a Level Often. A level catches uneven spots early, saving time and money. Check the bottom, walls, and coping for squareness.
  
  
• Maintain Liner Flatness. When working with vinyl, avoid cutting the liner. Use gentle, even pressure to lay it out and a roller to flatten it instead.
  
  
• Protect Tools. Keep all equipment in a dry place and maintain them regularly. A well‑kept shovel and wheelbarrow will last years.
  
  
• Budget Extras. Unexpected costs—such as extra sand, a small concrete patch, or a replacement liner—can sneak up. Set aside a contingency of 10–15% of your estimated budget.
  
  

Post‑Installation Maintenance

• Test the pH and chlorine levels at least twice a week during heavy use.
  
  
• Keep the filter clean; run the pump for 8–12 hours each day.
  
  
• Inspect the coping stones and liner for cracks or wear.
  
  
• Perform a full water change every 3–4 months, or when the water looks cloudy.
  
  

Enjoy Your Pool

A DIY round swimming pool is a labor of love that rewards you with a personal oasis. By following these steps, checking local regulations, and staying diligent with maintenance, you can enjoy a safe, beautiful pool for years to come. Dive in and make a splash!